I have a problem with the build: I have signal going through when switch is OFF, but nothing when it's ON, and no LED.
When I plugged the DC first time, the LED kinda flashed multiple times, then nothing.
Also, I'm using a 3PDT switch with embedded LED in the washer, so the LED pins are no the side of the switch.
I did a small 2x4 vero to connect a 470R resistor between 9V and LED+, and on the other row there is the LED- and the wire going to the first lug of the switch.
Nothing wrong here?
I would appreciate any help, or even be redirected to some ressources.