The new Dwarfcraft She Fuzz schematic was just posted a few days ago on FSB if anyone wanted to take a shot at making a layout. The biggest difference is the extra toggle switch that appears to possibly change the starve foot switch from latching to momentary(?). I guess you could just replace the latching switch to momentary. The new schematic also shows the texture (magic) pot as B100kninstead of B1m which might work better.
That was fast. Thanks. It looks like the Hex switch could just be bypassed and just use the Magic switch. Looks pretty much identical to the original otherwise. I might have everything except for the momentary switch, I’ll have to give it a shot. Thanks, I’ll keep you posted.
I have all the parts except the momentary switch. Based on the original I’m guessing the missing resistor value is 4.7k. The electros look right (I compared your layout to an older one) and I think volume 1 and 3 need swapping. I’ll give it a shot over the weekend.
I’m having a hard time following the wiring for the magic and hex switches. I would think lug 5 of the magic switch would go to the board and the spells pot would just connect to the switch. That way the spells pot could be bypassed. I could be wrong though.
Yes in that way the spell pot could be bypassed, only in one position of the magic DPDT, but I don't know the pedal very much so I don't know if it's really that way in the original one. I will try to check it!
Ok, built it and it works except for the stab switch. Looks like Stab one doesn’t connect to anything. It should go from the 33uf cap to the base of Q2. All of the electros are oriented correctly and from what I can tell the missing resistor value is 4.7k the hex and magic switches work as shown but I need a momentary switch. If I can get the stab switch sorted it should be good to go.
Ok. Recycled parts are becoming a problem. Put in a new stab switch. Works perfectly. Still need to get the momentary stomp switch but in the mean time it works perfectly. I used a B10k for now, need to order a B2k and see if that does anything different. Thanks andrea83, I really appreciate it.
Ok, I added the momentary switch and it works perfectly. The hex switch will either add the magic (momentary) switch to the circuit or bypass it to keep the spells pot active. Definitely a nice addition to the circuit. Thanks again.