Here is a verfied layout of DOD/BAT Boneshaker. Came out quite big but with 9 pots I doubt anyone will squeeze it in a 1509b box. A few component values is missing in the SCHEMATICS, R12 and C8 between Level pot and output. Also values of power filter caps and Vref resistors is missing so I went with 2x47k and 2x100uF.
Thanks to Sphere80 for verifying it and suggestions for some useful mods!
Thanks for verifying, I've updated the layout above with some suggested mods that you mentioned in our e-mail conversation. It would be cool if you could upload your offboard wiring diagrams, I'm sure it would be useful for some builders.
I also omitted C8 and R12 between volume pot and output since the those were omitted in one schematic and the DOD schem had no values printed.
I think I'm going to prepare the board and choose an enclose wor this offboard wiring monster.
As built, the depth pot has a 1uf and blends in a 47n. As you can imagine, this barely makes a difference. I've been experimenting with a smaller starting value (less than 220n is too thin) , and blending in a larger one.
It's a very solid distortion, having a DOD250 at its heart, but making that boost stage adjustable takes it to metal territory.